MEETTOMATCH: YOUR NEW MEETING PLATFORM
As part of the PG Connects experience, you will have full access to a familiar matchmaking and agenda platform. We use MeetToMatch as the platform where you’ll find attendees to meet, and where you’ll keep track of your schedule. It’s available for all registered participants to use in order to arrange meetings during the event.
The primary objective of PGC is to connect the games industry and this is just one of the many ways we can help you do that.
NOTE: The MeetToMatch platform goes live approximately two weeks before the conference and you will be automatically added to it and notified by email, as long as you have registered for a ticket. It will remain open for a couple of weeks after the event so you can finish up your conversations.
FREQUENTLY ASKED QUESTIONS
Your ticket to Pocket Gamer Connects includes access to the MeetToMatch platform. If you have registered for a ticket, shortly ahead of the event you will receive a notification by email inviting you to log in and set a password. (If you have a valid ticket but have not received a MeetToMatch notification by the time the event starts, please email the helpdesk.)
You will be familiar with MeetToMatch from other events, including the last few Pocket Gamer Connects events. It has an advanced search function and matches your needs to those of other delegates, and then automatically schedules a conversation with just a couple of clicks in your browser. A calendar view enables you to keep track of your scheduled meetings as well as the talks and panels you’re planning to watch.
It has profile pages to showcase you and your business, so be sure to fill in all your details – right at the start. You can also add products to your profile, to showcase your games or services.
After you’ve set that up, use the advanced search to find other attendees who match your business interests. When you and a potential contact have agreed to connect, the system will automatically schedule a meeting and allocate a meeting table in the venue. You can keep track of your meetings using the My Schedule calendar view.
There is more information about all of this below.
We typically turn on the meeting platform about two or three weeks before the event. If you have registered for a ticket, you will be notified by email and sent log-in information.
If you have purchased your conference ticket, your details will be automatically imported into the MeetToMatch platform and you will receive an email notification with the log-in details when the platform is live. You will need this to activate your account.
Please follow the MeetToMatch link in your log-in notification email. You will be taken to a screen where you will first add a password. Then you will be taken to the profile page where you will complete information about yourself.
You will be able to begin making meetings, which will be diarised for the week of the conference itself.
The platform is live and if you’ve registered for a ticket on Eventbrite you should have received a sign-in notification already.
Occasionally, spam filters can hijack genuine emails from us, so please check there. Perhaps you used a personal email account to register in Eventbrite? Please check that too. To help let important Pocket Gamer Connects and MeetToMatch platform emails get through, we suggest you whitelist emails from @pgconnects.com and @steelmedianetwork.com.
If you are sure you ordered a ticket, and the event is about to start, but the MeetToMatch notification still hasn’t shown up in your inbox, then please email [email protected] with your details and we’ll figure out what’s up.
You will need to answer a series of questions about yourself, your company and your interests and needs. The more accurate you can be with these, the more useful the system will be for everyone. Have a photo and a company logo to hand.
By default, your personal contact information (email and phone) is not shared with other attendees.
If you have used MeetToMatch before, perhaps as part of an alternative conference, you can bring import your profile from that previous event providing the platform can identify you from your email.
Our experience tells us that people are more likely to request or accept meetings with you if they can see a photo and read a little bit about your business. So please do take a few minutes to add details to your personal profile and your company profile.
Above the MeetToMatch dashboard – where you’ll find quick links to your meeting requests and notifications – you’ll see a menu. On the far right is MY PROFILE. Click on that to see your details. We suggest you immediately edit that page to include details about yourself and some words about your company’s goals. You can also upload a logo for your company. It will help people find you.
Then you will need to select a number of tags describing your core business. We strongly suggest you write a short but meaningful description of yourself and your company activities. Experience shows that people are more likely to connect with you if they understand you and your business needs. You can attach product information to your profile too.
At this point, you can add links and images for a project you’re working on or a product you want to showcase. Then you can begin looking for the perfect business partner, using the advanced search functions.
Yes! A new addition for MeetToMatch, available now at Pocket Gamer Connects, is the ability to showcase products on your profile page, making it easier for potential contacts to see what you’re working on. It creates something of a ‘virtual expo’ vibe.
When you set up your profile, you can use the Add New Product button to attach an image, links to an online pitch deck or external website, video and other details, in order to foreground your top projects.
Select MY PROFILE from the MeetToMatch top menu. There’s a familiar “edit” button on the left, but underneath that you’ll also find a button labelled “Add new product.” Click this to go to a page where you can add a project name, a link to its online page, a description of up to 1000 characters, an image and a link to a YouTube or Vimeo video. Images should be 640x320px and under 2MB in size.
This will sit on your profile as a showcase for your project.
Attendees can search for all products at the event under the Explore button on the MeetToMatch dashboard.
Remember to add tags to your products. This will help people find them in the platform because under EXPLORE > PRODUCTS/PROJECTS it is now possible to filter by tags.
There is no point labelling your company using special characters in an attempt to appear higher up the listings. By default, the MeetToMatch attendee list will be ordered by sign-up date, not company name.
We will regularly edit or remove obvious efforts to ‘game’ the system by including inappropriate or unnecessary characters, images or tags. Promoting yourself artificially high using these methods will just fall foul of our editors. We reserve the right to edit any profile in the platform, and even temporarily remove folk who aren’t playing fair. Please enter information correctly and accurately. Everybody can be found using the platform’s search functions.
We are all in business, of course, and we understand the desire to try clever ways of standing out; but this is a community event for the benefit of all of the industry. If you would like to be featured prominently in any of our activities, please consider a sponsorship package.
Once a Live meeting is scheduled, a table number or meeting zone will be allocated inside the venue and you can then meet at the agreed time. Meeting zones are clearly marked and there will be maps available around the venue. These meetings must be held during venue opening hours 8:30 am – 6pm.
Yes. In fact, before you seek meetings, you should probably check out all the fantastic content in the conference schedule. A version of it will appear on this site, but if you have a ticket you should look in MeetToMatch when that’s live. You’ll see a menu above the dashboard – hit PROGRAM there to see the interactive list of talks, panels and workshops! This is being constantly updated, so do bookmark it.
Once the conference has begun, this list will contain information on what the session will be about, what track theme it fits under, who the speakers are, and when it takes place. If more information is available about the speaker, you’ll find it by clicking on Details.
If you see something you like, click Add To Agenda, and it’ll immediately land on your calendar (viewable under MY SCHEDULE). The platform will ask you if you are open to receiving meeting requests during that period, and you can choose NO to completely reserve that slot for the talk you want to see, or NO if you are happy to miss that talk if a more exciting meeting comes along.
This way, you can build your schedule for the event, which takes into account all the talks, panels, round-tables and meetings you want to have, at the times that suit you.
You can, if you wish, block out areas of your time where you are NOT available to meet.
From the My Schedule menu at the top of your MeetToMatch dashboard, you can see your calendar.
You can click on any half-hour slot and click ‘set to unavailable’. Do this for slots when you do NOT want to have meetings. This will secure blocks in your Agenda where the platform will not attempt to schedule meetings.
To block out a whole day at a time, click the padlock next to the date.
You can unlock a space by similarly clicking on ‘set to available’.
Pocket Gamer Connects events are always about connecting people – hence the name! We are expecting 700+ professionals from the games industry to join us during the conference, and we’re already well on our way there.
Looking for people to do business with, job opportunities, or valuable industry connections of all sorts? Head to the ATTENDEES link from the top of the dashboard.
Here you’ll immediately see a list of attending companies. By default it will be ordered by sign-up date, so you can easily find companies that have registered with the conference since the last time you looked. You can choose to order the list alphabetically if you prefer: use the drop-down menu.
Now it’s time to search for people. If you’re feeling lucky, enter a quick keyword search, such as a company name, and hit Search. For more options, open Advanced Search. Here you can enter more criteria, and filter by company activities, investment opportunities, platform and other factors.
The results will come in the form of company names. Click on a company to visit its page, where you will see a list of attending staff members. If you click on Request A Meeting, you’ll be given the option to select a time slot on your calendar.
You can add a personal message, and then fire it off.
When you request a meeting with somebody, you can now send up to three messages to each.
You need to request a meeting first of all, and can attach a personal message to that. Messaging will now be active, and you can exchange up to three messages. Once the meeting request is accepted, more messages are possible.
Messaging is disabled after cancelling a request or cancelling a meeting. This is to prevent unwanted spam messages.
The message thread also keeps a record of any changes in the scheduled meetings.
You can disable “receive status updates” in your settings if you don’t want notifications every time there is an incoming message. You will still receive new meeting requests.
Please note: students have limited access and cannot request meetings or initiate message threads.
Two possible reasons. Firstly, perhaps you’re a student? People on free student tickets cannot contact professional attendees, by default. Other attendees can contact you if they want to find out more about your work. If you’re a student and you want to reach out to any of the professional attendees, the solution is to pay for a pass (check out the registration page on this site).
Secondly, it’s possible you’ve made too many meeting requests in a row that have not yet been answered. Non-students can send unlimited meeting requests, but if you blast a load out with no response from other attendees, the system may pause until your existing requests are accepted or rejected so that your calendar doesn’t collapse under the weight.
If you’re not a student, and you’ve hardly sent any requests out, but you still can’t arrange meetings, something may need a tweak. Please email [email protected] with your username (email).
When you registered, you each must have given the company name slightly differently. Or used different email domains. The platform looks at both (the company name you give and your email format) to link people up. Perhaps one of you added LLC to the end and the other didn’t, or one of your wrote Acme Games and the other Acme Studio. Or maybe you both wrote the name right, but one of you registered using a private email account.
Whoever is ‘wrong’ should go into their My Profile area (use the drop down menu at the top right) and change their affiliated company to the correct name. Save, and you should be connected with your colleagues.
If you encounter a problem, please email [email protected] and we can help you fix this.
In MeetToMatch by default attendees are listed according to ‘sign-up date’. Look under Attendees, in the top nav bar on your dashboard.
Ideally, yes. If you’ve filled in your profile appealingly (see above), people will be looking for you! If you receive an invitation to meet, please try to respond quickly, to keep things moving.
People will understand if you reject their request – everybody’s busy, and people appreciate that what they have to offer might not be what you’re looking for.
But if you ignore meeting requests, you’ll keep them hanging on while they’re trying to plan their week. So when you receive a notification, please do dive in and accept or reject meeting requests as often as you can. It keeps the momentum going.
As with our other Connects conferences, we will leave the meeting platform open for a week after the event itself, so you can download your schedule or finish up conversations you’re already having. During this period, you will not be able to make any more matches or automate any more meetings.
If you have any queries, please email [email protected]. This email is operated by the Pocket Gamer Connects team.
There are more general MeetToMatch tips at https://www.meettomatch.com/faq/